DM1000VCM Console per produzioni digitali

		DM1000VCM
Outline
Mixing capability	Mixing channels	48
	GROUP	8
	AUX	8
	MAIN	Stereo
	Input channel functions	Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan
	Output channel functions	Attenuator, 4-band PEQ, Compressor, Delay
	On-board processors	4x SPX multi effectors
I/O	Mic inputs	16
	Phantom power	+48V DC; ON/OFF per channel
	Line inputs	4x Omni in
	AD converter	24-bit; 128-time over sampling
	Line outputs	12x Omni output
	DA converter	24-bit; 128-time over sampling
	Digital I/O	2x 2tr in/out
	Expansion slots	2x Mini-YGDAI (16-in/16-out)
	Control and others	To Host(USB), Control(GPI), Remote, MIDI, Time code in (SMPTE), Word clock I/O
General specifications
Internal processing		32bit, Accumulator: 58bit
Sampling frequency rate	Internal	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling frequency rate	External	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay		Less than 1.6ms (@48kHz), Less than 0.8ms (@96kHz)
Total harmonic distortion		Less than 0.05% (20Hz-40kHz)
Frequency response		0, +0.5, -1.5dB 20Hz-40kHz
Dynamic range		DA: 110dB; AD+DA: 106dB
Hum & noise level	Equivalent input noise	-128dBu
Hum & noise level	Residual output noise	-86dBu
Crosstalk		-80dB
Power requirements		AC100V, 120V, 220-240V 50/60 Hz
Power consumption		135W
Dimensions	W	436mm; 17-3/16in
	H	200mm; 7-7/8in
	D	585mm; 23-1/16in
Net weight		20kg; 44.1lbs
Accessories		Owner’s Manual, Studio Manager Installation Guide, AC power cord

Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Input Level			Connector
Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Sensitivity	Nominal	Max. before clip	Connector
CH INPUT 1-16	0	-60dB	3kΩ	50-600Ω Mics & 600Ω Lines	-70dB	-60dB	-40dB	XLR3-31 type (Balanced)
	0	-16dB			-26dB	-16dB	+4dB
	20	-16dB			-6dB	+4dB	+24dB
OMNI IN 1-4			10kΩ	600Ω Lines	+4dB	+4dB	+24dB	XLR3-31 type (Balanced)

Analog Output Characteristics

Output Terminal	Actual Source Impedance	For Use with Nominal	GAIN SW	Output Level		Connector
Output Terminal	Actual Source Impedance	For Use with Nominal	GAIN SW	Nominal	Max. before clip	Connector
OMNI OUT 1-12	75Ω	600kΩ Lines	-	+4dB	+24dB	XLR3-32 type (Balanced)
PHONES	100Ω	8Ω Lines	-	4mW	25mW	ST Phone jack (Unbalanced)
PHONES	100Ω	40Ω Lines	-	12mW	75mW	ST Phone jack (Unbalanced)

Terminal		Format	Data Length	Level	Connector
2TR IN DIGITAL	1	AES/EBU	24bit	RS422	XLR3-31 type (Balanced)
2TR IN DIGITAL	2	IEC-60958	24bit	0.5Vpp/75Ω	RCA pin jack

Terminal		Format	Data Length	Level	Connector
2TR OUT DIGITAL	1	AES/EBU (Professional use)	24bit	RS422	XLR3-32 type (Balanced)
2TR OUT DIGITAL	2	IEC-60958 (Consumer Use)	24bit	0.5Vpp/75Ω	RCA pin jack

* 0dB=0.775Vrms; 0dBV=1.00Vrms