SWP2

SWP2-10MMF SWP2-10SMF
Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector) 10 10
Number of SFP+ ports (10GBASE-SR, opticalCON DUO connector) 2 0
Number of SFP+ ports (10GBASE-LR, opticalCON DUO connector) 0 2
Console port 1 (RJ-45) 1 (RJ-45)
Automatic negotiation Available Available
Auto MDI/MDI-X Available Available
DIP switches CONFIG, VLAN PRESET CONFIG, VLAN PRESET
Indicators Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2 Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2
Operating temperature 0 to 40°C 0 to 40°C
Storage temperature -20 to 60°C -20 to 60°C
Power supply (AC IN inlet) AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type
Power supply (EXT DC INPUT inlet) 24VDC±2V, 0.78A, XLR-4-32 type Connector 24VDC±2V, 0.78A, XLR-4-32 type Connector
Maximum power consumption 21W, 0.35A 21W, 0.35A
Heat dissipation 18.5 kcal/h 18.5 kcal/h
Body material Metal case, no fan Metal case, no fan
Hazardous substances management RoHS compliant RoHS compliant
Dimensions W 480 mm 480 mm
H 44 mm 44 mm
D 362 mm 362 mm
Peso 4.5 kg (excluding accessories) 4.5 kg (excluding accessories)
Accessories Power cord, Owner's manual Power cord, Owner's manual
Options PA-700 (AC adaptor) PA-700 (AC adaptor)
  • * The LED MODE button allows the PORT indicators to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.

INTERFACE SPECIFICATIONS

Terminal Format Level Connector
1-10 *1 IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T etherCON CAT5e
11,12 *2 IEEE802.3ae 10GBASE-SR 10GBASE-LR *3 opticalCON
CONSOLE (RS-232C) - RS-232C RJ-45 *4
EXT DC INPUT - - XLR-4-32 type *5

*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A

CONNECTOR PIN ASSIGNMENTS

CONSOLE (RS-232C)

* These signals are not used on the SWP2.

PA-700 AC Adapter

AC adapter for providing redundant power supply for SWP1, SWP2, RSio64-D, and DM7 Control.

  • Input power voltage: AC100-240V
  • Output power voltage: DC24V
  • XLR4-11C type connector
  • Dimensions: 139.0(W) x 31.3(H) x 58.2(D) mm *without cables